____________

iMPdraw Lite v1.132 - Public Edition/Version
(English Manual - Thanks to Morri to correct some english language errors)
____________

(c)iMP4CT December 2014/Aout 2015
Code by AsT
Mode 1 HeadBand : Barjack
BetaTests : Barjack, Beb, Kukulcan, Lone, Madram, Maxit, Supersly & TotO 
Reset#20 - "Condense loves Pulpo Corrosivo" example graphic by Ced
Corrected a Bug concerning palette choice, seen by Beb! (23/07/2015)
This version only works with Crtc type 1, 3 and 4 
Last modif 09/08/2015 19h57
________________________

Draw Mode :

Functions : 

Arrows (Up, Down, Left, Right) -> move cursor on your screen.
Joystick (Up, Down, Left, Right) -> same as arrows
A or Q -> Select ink in the 16 colours (Ink-)
Z or W -> Select ink in the 16 colours (Ink+)
f1 -> Change ink in the 27 palette colours (PalDec)
f3 -> Change ink in the 27 palette colours (PalInc)
Space or Fire 1 -> Put pixels on your screen

New 1.132
Control+Shift+Esc -> Reset iMPdraw 
(Screens are saved in banks #c4 and #c5)
Tab : Toggle screen High/low from the 32k screen (a blue arrow allows you
to know where you're working on the screen... Idea from Kukulcan)
Copy : (Fullscreen Mode) Toggle Display fullscreen/ComeBack to iMPdraw
F. -> Select ink in the 16 colours (Ink-)
F0 -> Select ink in the 16 colours (Ink+)
(F. and F0 do the same thing in Ocp.)
F1 and F3  (Palette - and +)
(Palette's bug has been exploded!)
1 -> Crtc 1 Adaptation
3 -> Crtc 3 and 4 Adaptation                                               
Del or Fire 2 -> last's pixel undo 
C -> Change cursor's colour (pen 1 to 15)
M -> Magnify (x8/x4) - WIP for the moment

if you have had a reset, you can retrieve the files like this :
in basic -> out &7F00,&C4
         -> save"impdraw1.go1",b,&4000,&4000 (High Screen)

New 1.132         
         -> out &7F00,&C5
         -> save"impdraw1.go2",b,&4000,&4000 (Low Screen)
__________________________

Functions with CTRL :

Ctrl+Arrows -> cursor moves faster
Ctrl+Joystick -> Erased... Not present in this version 
Ctrl+L -> Display CAT if files .go1 are present on the disk
(Esc to come back to iMPdraw)
Ctrl+S -> Save file. Each file uses the same name loaded by command CTRL+L.
If no file has been loaded, the file will be saved as "impdraw1"

New 1.132
Ctrl+N -> New - Clear the screen. Palette is not erased.


FULLSCREEN Mode:

Concerning Fullscreen Mode, it allows you to see your screen in fullscreen, 
but that's not all...
You can define a window with arrows keys (coord x1,y1) and f4, f6, f8 and 
f2 keys (coord x2,y2)
You must validate the window by pressing the "Return" Key. To cancel, 
just press "Esc" Key.
Move your window with arrows keys
C -> Copy the window
V -> Vertical flip of your window
H -> Horizontal flip of your window
Del -> Erase your window with selected colour.
f0/f. -> Select a new colour to erase your window (The new colour will be displayed for
a few seconds in the bottom right corner).                                                    
CTRL+S -> Save fullscreen file into one 32k .scr file (saved in basic)
CTRL+W -> Save your .win file (if validated)
(All .win files less than 80 chars are all compatible with Ocp) 
Copy -> ComeBack to Draw Mode.
___________________________

iMPdraw Lite Rom :
__________________

If you have a Ramcard, it's very easy. Just use the command burn
burn,"impd2.rom",number of rom
If you have an X-Mem, this will be the flash command
flash,"imp2.rom",number of rom

When your rom has been installed, you simply enter impd command
to run iMPdraw, what else?

__________________________              
What is in file .rar  ?
impd2.rom (binary rom file without header)
impdraw lite v1.132.hfe (For all people who own an hxc drive)
iMPdraw Lite v1.132.dsk (Dsk File)
What is it on the disk ?

-> impdraw.bas - allows you to run iMPdraw in Draw Mode.
-> impd2.rom - it's simply iMPdraw file on rom (if you're a lucky owner
of X-Mem or Ramcard)
-> poulpe.go1, go2, and kit (gfx from Ced/Condense)
__________________________

In the "Lite" version, I've added a blue arrow at the top of the screen, 
near the coord. When it is up, you're working on the high screen, and when it's
down, you're working on the low screen.

TotO and I have been working on a new version (v2) since January 2015.
Thanks to all the guys who give me the power to finish this "special edition".
Thanks to Ced, for his fantastic gfx coming from Reset#20 
("Condense loves Pulpo..") used without autorisation and to Barjack for his 
advices, gfx and participation.
All suggestions and bugs reports : ast49152@gmail.com
__________________________    